MetalCloakās Front Upper Durotrakā¢ A-arms for the Ford Bronco 6G maximize strength for your Broncoās suspension. Increased clearance allows for additional down travel when using lift braces/spacers of up to 2.5in.Features Include:
- Made of 3/16ā Steel
- Formed, Welded, and Boxed Structure
- 1.25 Heat Treated Hard Chromed Teflon Lined Uni-ball
- Heavy Duty Uni-ball Pinch Cup
- Patented Durotrak Joints
- Gold Zinc Finish
- Quick & Easy Installation
- All Required Hardware
- Made in the USA
Made of thick 3/16ā steel, the fully welded Bronco A-arms increase the suspension droop by providing additional clearance between the A-arm and the spring of the coil-over.
The Bronco A-arms come with heavy duty uni-balls for a big upgrade over weak factory ball joints. The Uni-balls are made of 1 Ā¼ā Precision Ground Heat Treated Hard Chrome Plated Teflon Lined Steel that greatly increases strength and durability.
Durotrak A-Arms are built with additional caster with an adjusted camber curve for lifted applications from 1 in to 3 inches. MetalCloak’s uni-ball upper control arms correctly re-align your Bronco to improve the overall handling characteristics of your lifted rig.
The Uni-ball cup and pinch bolt system prevents play in the cup and bearing while still offering an easy to service set up without requiring removal of the A-arm.
A Laser engraved “M” dust cover adds style and protection from the elements for an extended service life of the uni-balls
MetalCloak Bronco A-Arms are equipped with the patented 2 piece Durotrak joints for excellent noise vibration and harshness dampening. The Patented Durotrakā¢ Bushing is made with a proprietary elastomer compound unique to MetalCloak. The Durotrakā¢ two part bushing is comprised of two pieces that thread together making this bushing simple to install without a press, reduces vibration and harshness transferred to the driver, and improves vehicle steering input.
The Bronco A-Arms are finished in MetalCloakās signature gold zinc to protect them against the elements when out on the trails; this is top level quality, that is made right here in the USA.
Bronco A-Arms
MetalCloakās Durotrak Front A-arms for the Ford Bronco 6G maximize strength for your broncoās suspension. Increased clearance allows for additional down travel when using lift braces/spacers of up to 2.5in.
Additional Clearance
Made of thick 3/16ā steel, the fully welded Bronco A-arms increase the suspension droop by providing additional clearance between the A-arm and the spring of the coil-over.
Durotrak A-Arms are built with additional caster with an adjusted camber curve for lifted applications from 1in to 3inches. MetalCloak’s uni-ball upper control arms correctly re-align your Bronco to improve the overall handling characteristics of your lifted rig.
Heavy Duty Uni-ball
The Bronco Durotrak A-arms come with heavy duty uni-balls for a big upgrade over weak factory ball joints. The Uni-balls are made of 1 Ā¼ā Precision Ground Heat Treated Hard Chrome Plated Teflon Lined Steel that greatly increases strength and durability.
The Uni-ball cup and pinch bolt system prevents play in the cup and bearing while still offering an easy to service set up without requiring removal of the A-arm.
Uni-ball Pinch Clamp
The Uni-ball is pre-installed and clamped into place. The Clamp makes it easy to service without a need for a press and the C-clip retainers in conjunction with the pinch clamps hold the uni-ball securely in place.
Billet Uni-ball Dust Cover
A Laser engraved “M” dust cover adds style and protection from the elements for an extended service life of the uni-balls
Durotrak Bushings
MetalCloak Bronco A-arms are equipped with the patented 2 piece Durotrak joints for excellent noise vibration and harshness dampening. The Patented Durotrakā¢ Bushing is made with a proprietary elastomer compound unique to MetalCloak.
The Durotrakā¢ two part bushing is comprised of two pieces that thread together making this bushing simple to install without a press, reduces vibration and harshness transferred to the driver, and improves vehicle steering input.
What’s in the Kit?
- Durotrak A-Arms (2)
- A-Arm Spacers (4)
- Bolt Sleeve (2)
- Retaining Rings (4)
- Spherical Bearing (2)
- Bolt Washer (2)
- Dust Cap & O-Ring (2)
- Uni-ball Bolt (2)
- Durotrak Bushing (4)
- All Required Hardware
TECHNICAL SPECIFICATIONS
Items | Details |
---|---|
Compatibility | 2021 + Bronco 6G |
A-Arms | 3/16″ Hot Rolled Steel Plate |
Durotrak Bushing | Proprietary Vulcanized Elastomer |
Steel Coating | Gold Zinc |
INSTALLATION
Installation Difficulty | Moderate |
Body Modification | None |
Time to Install | 3 – 4 Hours |
Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |